In order to activate the sensor, please follow the guidelines below.
|
1 Open the Nordsense Walker app |
|
|
2 Login with your credentials
|
|
|
3 Choose - "Install Container" |
|
|
4 Scan the NFC tag on the device, where the "Nordsense" inscription is located |
|
|
5 Adjust and set the location with the blue point, where the device will be installed. Make sure to wait a little longer (<2min) such that set position is as accurate as possible |
|
|
6 Type the container name and take a picture of the bin, where the device will be installed |
|
|
7 Choose the Content Type, where the device will be installed |
|
|
8 Choose the Container Type |
|
|
9 When the confirmation of sensor being installed appears - "Sensor was installed correctly", you are good to go! |
 |
If you encounter any unexpected issues during the device's activation, please contact - support@nordsense.com.